Home » Posts tagged 'hardwood floor sanding'

Tag Archives: hardwood floor sanding

Refinishing Your Hardwood Floors

During the refinishing process, the floor will be sanded down, and a new stain and sealant will be applied. This will give your floors a fresh look and protect them from moisture and wear and tear.

Hardwood Floor Refinishing

It’s important to clear the room of furniture and rugs during this time. This will help reduce the strong fumes produced during Hardwood Floor Refinishing Bergen County NJ.

Hardwood floors look great when they’re clean and shiny, but even the best hardwoods can get dull and dirty over time. Refinishing them restores their beauty and shine, making them look almost new again. Refinishing is also an effective way to fix damage and scratches. It’s important to recognize when your hardwood floors need refinishing and know when to call in the pros for the job.

If your floors have deep scratches, dents, or water damage, it’s likely time for refinishing. In addition, refinishing can be done to change the color of your floors if you want to brighten or darken them.

Before refinishing, the floor is thoroughly cleaned to remove dirt, dust, and debris. Streaks and stains are removed using special equipment. The floor is then sanded with specialized sanders, starting with rough grit sandpaper (usually 36) and progressing through a series of finer grits until the final stage (usually 100 or 120).

When the sanding process is complete, any repairs can be made. For example, holes can be patched, gouges filled, and loose boards nailed down. Once the floor is dry, a sealant is applied to protect and give it a shiny finish.

Once the finish is dried and cured, it’s time to re-install any baseboards or trim that were removed during the refinishing process. Then, the room can be used again.

The most common type of wood floor finish is polyurethane, but other types are available depending on your preference and lifestyle needs. It’s important to choose a durable, long-lasting finish that resists staining and scratching. There are also eco-friendly finishes available that contain less volatile organic compounds (VOCs) than traditional oil-based products.

Keeping your floors properly maintained is the most important thing you can do to extend their life and keep them looking beautiful. Vacuum often and sweep regularly, and be sure to use a soft-bristle broom. Avoid harsh, abrasive cleaners, as they may damage your hardwood floors. A flooring professional can recommend the right cleaner for your floors. A good cleaner will have a built-in protectant to prevent moisture from damaging your wood floors.

Scuff Removal

Scratches are one of the most common concerns homeowners have when they start refinishing hardwood floors. There are a few different methods to fix them depending on the type of finish and the extent of the damage. Superficial or surface scratches can be corrected by simply cleaning the area. Using a soft cloth and hardwood cleaner, such as Bona, will usually make the floor look new again. If the scratch is deeper, you can use a wax stick, apply a layer of coconut oil or even create a mixture of baking soda and olive oil. Commercial scratch removers, stain markers and blending pencils are also useful for repairing scratches.

For major scratches that go all the way through the wood plank, you can use a pre-colored wood putty that closely matches your hardwood flooring. This can be purchased at most home improvement stores and is typically applied to the area with a plastic putty knife. It should be allowed to dry and then sanded with 150-grit sandpaper to ensure the patch is smooth. After sanding, the area should be stained.

If you’re refinishing your hardwood floors yourself, the first step is to cover all areas not being worked on with plastic sheeting and to tape down any doors or floor registers to prevent any dust from migrating. It’s also important to be sure that your vacuum is able to pick up dust as well.

Professional refinishers typically have unique containment systems in place to minimize the amount of dust produced during sanding. However, there’s still going to be a lot of dust, so be prepared for that. Once the sanding is complete, the room should be thoroughly cleaned to eliminate any remaining dust and a fresh coat of polyurethane is applied.

This may take four to seven days, but the results are worth it! When the floors are finished, the homeowner should allow it to dry for another 24 hours before walking on it in socks. Then wait 48 hours to set furniture on the floors. The floors should be sanded again in six to eight years to maintain the best look possible.


Refinishing hardwood floors is an important project that breathes new life into your home. But, it can be a time-consuming and tedious process. Fortunately, with the right tools and a bit of preparation, you can complete this project with ease and enjoy the beautiful results.

One of the most important aspects of refinishing wood floors is determining which type of stain and varnish to use. The type of stain and varnish you choose will determine the color of your hardwood floors, and also how durable they will be. There are many different types of stains and varnishes available, so make sure you choose the right one for your floor.

Stains should be oil-based and low in VOCs, as well as having a tinting base to adjust the color intensity. It’s also recommended to use a foam applicator pad when applying the stain. After the stain has been applied, it’s best to wait for the floor to dry completely before moving furniture back into place. Typically, you should wait for about 48 hours for the finish to fully cure.

The final step in the refinishing process is applying a protective layer of varnish or polyurethane to your hardwood floor. The finish will protect the floor from scratches, scuffs, and moisture, as well as give it a nice shine. Varnish can be either oil-based or water-based, depending on your preference and the type of wood.

Both refinishing and resurfacing are great options for revitalizing hardwood floors, but it’s important to do your research before making a decision. Refinishing is more comprehensive, but it also requires a higher level of skill and equipment. Resurfacing is easier for DIY projects, but it may not be as durable.

If you’re not sure whether your wood floors need refinishing, try putting a few drops of water on them. If the water beads, it’s likely time to refinish your wood floors. It’s recommended to refinish your hardwood floors every seven to ten years, or four to six times for typical 3/4-inch solid hardwood. To get the most out of your hardwood, it’s best to follow a maintenance schedule that includes regular sweeping, vacuuming, and spot cleaning with a soft cloth or mop. You should also wipe up spills promptly, and rearrange your furniture occasionally to distribute wear evenly.


The final aspect of refinishing is the application of a sealant to protect the wood and give it a shiny, finished look. A flooring professional will recommend the right type of sealant based on your lifestyle and aesthetic preferences. It’s also a good idea to do a smell test when applying the sealant. It is normal for new sealant to have a strong chemical smell, but if the smell is overpowering, it may be a sign that you are using a low-quality product.

A well-maintained hardwood floor is a beautiful and durable addition to any home. However, over time, your hardwood floors can lose their luster and start to show signs of wear and tear. Refinishing your hardwood floors is an excellent way to restore their original beauty and increase the value of your home.

There are a few telltale signs that your hardwood floors are ready for refinishing. If you notice that your hardwood floors have become dull, scratched, or chipped, it’s definitely time to consider refinishing.

Refinishing is more extensive than resurfacing, but both options can provide attractive results. The decision to refinish or resurface depends on the state of your floors, the type of finish on them, and how much foot traffic they receive.

One big consideration is whether your floors have an oil-based or water-based finish. Oil-based finishes tend to wear down more quickly than water-based ones.

Hardwood floors can be sanded and re-stain for an entirely new appearance, or they can be resurfaced with a water-based product to extend the life of the existing finish.

It’s important to choose a reliable and experienced contractor for your hardwood refinishing project. Ask for references and check them thoroughly. You’ll want to know if past customers were satisfied with the work that was done and how the contractor resolved any problems.

When choosing a contractor, make sure that they are licensed, insured, and bonded to work in your area. Ask for copies of these documents so that you can verify their authenticity. Also, it’s a good idea to check with your local Better Business Bureau to see if there are any complaints against the company.